H2O Warehouse - Water Purifiers and Filters

           CALL TOLL FREE (888) 855-3545                                      View Cart

navcolor.jpg (956 bytes)help choosingwater filter productswater filter manufacturersreplacement filterscustomer service
water purifiers
Home    

Help Choosing

HouseHold

Omni Water Filters

Camping - Emergency

Personal

Clearbrook Water Bottle Purifiers

 

Replacement
Cartridges

 

Customer Info
Human Assistance
View Cart
Checkout
Return Policy 
Shipping

E-mail Us

 

 

 

 

    042511omonly  


Home

Whole-house purifiers
Under-sink water filters
Faucet-mount/countertop
Fridge/ice-maker filtration

Choosing a water filter
Comparing water filters
Wrenches & O-rings
Water filter parts
Replacement cartridges

Reasons to filter
Other water information
FAQ's - water treatment

How to contact us


Omni water filtration systems
give you peace of mind.

Private Well And Public Source Water Filtration Systems

Approximately 23 million people in the U.S. get their water directly from private wells, many without water filtration systems . Most wells tap an underground aquifer (also known as ground water). Although ground water appears protected from sources of contamination, it can become polluted from industrial spills, underground fuel tank leaks, fertilizer, or wastes that seep into the ground. Ground sources can migrate several miles, which means your well may be contaminated by an industrial facility or farm miles "up gradient" from your home. Wells are also susceptible to sediment contamination, so the water in your home may appear discolored or "dirty."   Even public treatment plants are not 100% effective.

For this reason, you should have your well tested annually. To have it tested, call a local analysis laboratory. Lists of laboratories certified by your state or EPA may be available from your state or local health department. Some local health departments also test private wells for free.

Tests for contaminants such as nitrate and coliform bacteria performed by a private laboratory usually cost between $10 and $20. Cost increases if you ask the laboratory to test for other contaminants. Once the laboratory performs the tests, it will mail you the results. You can compare the results to EPA's National Primary Drinking Standards and National Secondary Drinking Standards to find out if your source falls below levels EPA thinks are safe for certain contaminants.

A note of caution: a test will only tell you what is in the source that day. Public treatment plant failures can occur intermittently, and pollutants can be present in your water after these failures or after other events (e.g., after farm fertilizing periods, heavy rains, or season changes).

Knowing what's in your source will help you select an OMNIFilter. If your water is high in rust and/or sediment, or if you wish to reduce odors in all your faucets, showerheads, and appliances, we recommend installing a Whole House filter. If you are concerned about bacteria, lead, volatile organic compounds (VOCs) in your well source, we recommend installing an Undersink filter. Or if you just want great tasting refreshment, we also recommend an Undersink filter.

People who use public sources are not immune from problems either.

Omni Water Filters

| Whole House | Undersink | Faucet Mount | Refrigerator

If you need help choosing the right filter for your needs, or need additional information, please call our

Customer Service Department at 1-406-889-5288.

 

 

View Cart | Check Out

H2O WAREHOUSE
 
Call toll free (888) 855-3545

  info@h2owarehouse.com

PO Box 305
Rexford, MT  59930

                        11082010                           

bottom2.jpg (3348 bytes)